From Montana Tech High Performance Computing

Revision as of 09:37, 10 June 2020 by Bdeng (talk | contribs) (Running desktop gui from Management Node)

COMSOL General Documentation

COMSOL[1] documentation is available in both html and pdf on[2]. Navigate the file directory structure to locate the desired document. Here is direct link to the Introduction to COMSOL [3]. There is also documentation available through the COMSOL desktop. The remaining documentation in the Wiki below describes how to run COMSOL on the cluster.

Available COMSOL Modules

Our COMSOL license comes with several modules including HEATTRANSFER, OPTIMIZATION, STRUCTURALMECHANICS, NONLINEARSTRUCTMATERIALS, ACOUSTICS, ACDC, etc. (For a complete list of modules refer to the command at the end of this page) Our COMSOL license allows 3 concurrent instances of COMSOL (this also includes COMSOL running on office computers) and the modules allows 1~3 concurrent use. As a result, please remember to exit COMSOL when you are done with your calculations, so that it'll not affect other users.

Running desktop gui from Management Node

The COMSOL desktop gui can be run on the management node, but long simulations should be executed on the compute nodes (see below). Once logged in (make sure you have X server running on your local machine), type the following:

module load COMSOL

Submitting batch jobs through Moab

To avoid overloading the management node, COMSOL should be used in batch mode and jobs should be submitted to the compute nodes through torque.

Single Node

  1. Create a job script for using 4 processors (cores) - put the following in a file called comsoljob
    PBS -l nodes=1:ppn=4
    #PBS -j oe
    #PBS -N ComsolJob
    #PBS -S /bin/bash
    #PBS -m be
    #PBS -M
    #PBS -l walltime=00:20:00
    comsol batch -inputfile in.mph -outputfile out.mph -np 4
    -->be sure to update with you input/output file names and your usernames
  2. Submit to Moab
    msub comsoljob
  3. Check status with showq or qstat or Ganglia.

Multiple Nodes with Intel MPI

COMSOL is installed with Intel's MPI and can be used on multiple nodes. In order to run on 2 or more node, modify your job script to include -clustersimple -f $PBS_NODEFILE.

For example:

#PBS -l nodes=2:ppn=32
#PBS -N Comsol-2-node-32-core
#PBS -d /home/mtech/username/comsol
#PBS -l walltime=00:30:00
comsol batch -clustersimple -f $PBS_NODEFILE -inputfile mycomsol_file.mph -outputfile mycomsol_out.mph
(edit username/path, mycomsol_file and mycomsol_out for your model)

LiveLink for MATLAB

To use COMSOL with the LiveLink for MATLAB:

comsol server matlab

This will start up the MATLAB Desktop.

To run a COMSOL batch job through Moab using a .m file (e.g., myprog.m), put the following in a job script:

#PBS -l nodes=1:ppn=32
#PBS -j oe
#PBS -N ComsolJob
#PBS -S /bin/bash
#PBS -m be
#PBS -l walltime=02:00:00
comsol server < /dev/null > comsolserver.log &
matlab -nodesktop -nosplash -r "addpath /opt/COMSOL43b/mli, mphstart, myprog, exit"

COMSOL will automatically use the 32 available processors in the node. This job would run for 2 hours and then be cancelled, if you expect a longer run, then make sure to update the walltime.


COMSOL's performance generally improves as more processors (i.e., cores) are used until a certain point. This varies with the type of simulation and model being used. The "sweet spot" might be just 4 or 8 processors. For example one test gave


While hyperthreading is currently enabled, don't expect performance to improve for np > 16 as there are 16 cores per node (32 threads run simultaneously with hyperthreading and COMSOL does not take advantage of hyperthreading).

Checking for license availability

Montana Tech has a floating network license, so COMSOL could be in use on another system. To check which licenses are available:

/opt/comsol53/license/glnxa64/lmstat -a -c /opt/comsol53/license/license.dat